Monteringskit #1
(4.2/5)
Based on 96
unique ratings.
-+- No articles matches your choice -+-
-+- No articles matches your choice -+-
(4.2/5)
Based on 96
unique ratings.
INSTALLATION KIT #1 · 8 ITEMS · FOR WINDOW FILM INSTALLATION
Installation Kit #1 – everything you need for a smoother window film installation
A complete and practical starter kit with tools, cleaning accessories and installation products for pre-cut automotive window film. The kit supports the entire process – from cleaning and application to installation and finishing.
Quick facts
Contents:
8 selected installation products
Use:
Installation of pre-cut window film
Installation solution:
FilmApp concentrate, 10 ml
Dot matrix product:
TintGel™, 50 ml
Application:
Foam brush for TintGel™ included
Quantity:
One installation kit per order
Prepare the glass
The spray bottle and two different cloths help you clean the glass thoroughly before installation.
Apply TintGel™
TintGel™ and a foam brush are included for even application on the automotive glass dot matrix.
Install the film
FilmApp and the installation squeegee provide the essential tools for a controlled wet installation.
Everything together
There is no need to source the basic accessories separately, so you can get started straight away.
WHAT IS INCLUDED
Eight items for the complete installation process
Installation Kit #1 contains tools and consumable products for cleaning, preparation and window film installation.
NO. 1
Spray bottle
For mixing and evenly applying the installation solution.
NO. 2
Knife
A practical precision tool for window film installation.
NO. 3
Foam brush
For applying a thin, even layer of TintGel™.
NO. 4
Installation squeegee
Helps you push out installation solution and air.
NO. 5
Microfibre cloth
For gentle cleaning and drying of the glass.
NO. 6
FilmApp, 10 ml
Concentrated installation solution for wet installation of window film. Mix 2–4 ml of FilmApp per litre of water. Distilled water is preferable, especially if your tap water has a high mineral or limescale content or is of lower quality.
NO. 7
TintGel™, 50 ml
A dot matrix fix that helps window film lie more evenly against the glass.
NO. 8
Coarse fibre cloth
For thorough cleaning of the glass before the final wipe.
THE INSTALLATION KIT IS INCLUDED
When you buy selected pre-cut window film packages
Installation Kit #1 is included when you order one of the following automotive window film packages:
• All rear windows behind the driver's seat
• All rear windows plus the front doors
• 7 rear windows behind the driver's seat
• 5 rear windows behind the driver's seat
• 3 rear windows behind the driver's seat
• Minibus
ALTERNATIVE PURCHASE CONDITION
Also included with purchases of SEK 1,000 or more
You also receive Installation Kit #1 when you order pre-cut automotive window film with a total value of SEK 1,000 or more.
One kit per order
If you order window film for several vehicles, we include extra installation solution.
ADD TO THE KIT IF NEEDED
Some installations may require additional tools
Installation Kit #1 contains the essential equipment, but depending on the type of film, vehicle model, difficulty of the installation and your own experience or practical ability, you may need additional tools.
A heat gun may be required for certain types of installation. Additional squeegees, tools for confined areas or other specialist tools may also make the work easier.
Good to know
The product image shows the contents of the kit. Product colour, shape, size and design may vary. Always use the tools carefully and in accordance with the relevant installation instructions.
TINTGEL™ IS INCLUDED IN THE KIT
Prepare before installation
Read the installation instructions before applying TintGel™. They explain the correct working sequence, temperature and drying time for a smoother result on the dot matrix area.
View the TintGel™ installation instructions
Read more
Show less
(4.2/5)
Based on 96
unique ratings.
SWEDEN / SEK
