Easy to install film for ALL models! For headlights, fog lights, taillights. Effective protection and cool styling.

ProShield® Vinyl Foil

(4.3/5) Based on 219 unique ratings.

Article picture:

374 SEK Ordinary price (479 SEK)

Earlier lowest price: 399 SEK

Special price

Partno: PCP-HEAD

Stock status: Made To Order

Wishlist

Description

(4.3/5) Based on 219 unique ratings.

PROSHIELD® · 0.2 MM · PRE-CUT FIT

Pre-Cut ProShield® Headlight Protection Film & Light Film

Model-specific protection film that makes it easier to protect and refresh your vehicle's lights. The film is supplied pre-cut for the selected light, reducing material waste, simplifying positioning and requiring less rough trimming than film supplied on a roll or sheet.

View installation guide Learn about ProShield® View installation accessories

Quick facts

Thickness:
0.2 mm

Design:
Pre-cut for the selected vehicle and light

Protection:
Impact-absorbing film with 99% UV protection

Surface:
High-gloss finish after installation

Installation:
Wet or dry installation

Product warranty:
3 years in accordance with the terms

Model-specific shape

The film is cut to the shape of the selected light, making it easier to position correctly from the start.

Less material waste

You order the amount of film needed for the lights and avoid buying a larger piece simply to allow for rough trimming.

Easier installation

Less measuring and pre-trimming makes the work easier to manage, particularly if you are installing the film yourself.

Protection with a glossy finish

The 0.2 mm thick film helps protect against stone chips, road salt, dirt and road abrasion.

IMPORTANT INFORMATION ABOUT THE FIT

Pre-cut means easier - but not always completely adjustment-free

The construction of the lights and the accessible edges vary between vehicle models. Depending on the light, installation method and selected coverage, the film may therefore need to be folded around an edge or finish-trimmed after positioning and shaping.

OPTION 1

Fold the film around the edge

If the light has an accessible edge, the film can be shaped and folded around it for a discreet finish and greater coverage.

OPTION 2

Trim away the excess

If the edge is enclosed or difficult to reach, carefully trim away the excess film for an even finish.

ALWAYS USEFUL TO HAVE

Always keep a sharp knife available

Even pre-cut film may require fine adjustment. Use a clean, sharp knife with a light touch and take great care near the light, paintwork, trim and wiring.

THE RIGHT TOOLS MAKE IT EASIER

Recommended installation accessories

Have an installation squeegee, spray bottle and application fluid, microfibre cloth, heat gun and sharp precision knife ready before you begin. The tools required depend on the shape of the light, the selected installation method and your experience.

We always recommend keeping a knife available, even when the film is pre-cut, as an edge or detail may need to be fine-adjusted on the vehicle.

View all tools & accessories

CONTROLLED SHAPING

Shape curved areas with hot air

On curved and more complex lights, gradually shape the film with a heat gun. Keep the heat source moving and work methodically to avoid overheating the film or the light.

Always follow the complete installation guide for cleaning, positioning, shaping, squeegeeing and final edge finishing.

INSTALLATION AT A GLANCE

From a clean light to a finished result

The pre-cut shape reduces preparation, but a good final result still requires thorough cleaning, careful shaping and correct edge finishing.

STEP 1

Clean thoroughly

Remove dirt, grease, wax and other residue from the light and its edges.

STEP 2

Test-fit the film

Check the orientation, fit and the type of edge finish suitable for the light.

STEP 3

Position and squeegee

Install wet or dry as instructed and work out the application fluid and air.

STEP 4

Shape with heat

Gradually heat and shape the film over the curved areas of the light.

STEP 5

Finish the edges

Fold the film around the edge where possible, or carefully trim away the excess.

Read the complete installation guide before you begin. It contains more information about surfaces, installation methods, heat forming and how to finish the film safely.

Open installation guide

CAREFULLY DESIGNED CONSTRUCTION

Three layers that protect during installation

ProShield® consists of a liner over the adhesive side, the 0.2 mm film itself and a removable scratch-protection top layer. This construction helps keep the adhesive clean and the visible surface protected while the film is handled.

LAYER 1

Liner over the adhesive side

Removed before installation so that the film's adhesive side can be positioned against the cleaned light.

LAYER 2

ProShield® 0.2 mm

The impact-absorbing main layer provides the protection and the final high-gloss surface.

LAYER 3

Scratch-protection top layer

Protects the film surface during installation and is removed as the installation approaches completion.

CHOOSE YOUR LOOK

Six finishes - from clear protection to distinctive styling

Choose transparent protection or a tinted film for a more individual appearance. The final look and light transmission are affected by the film finish, the original colour of the light and the construction of the light.

Clear/Transparent

Clear, high-gloss protection that preserves the light's original appearance.

Smoke

A lightly smoked finish for a discreetly darker and more uniform appearance.

Dark Smoke+

A darker smoked option for a more pronounced styling effect.

Yellow

Yellow tint that creates a classic, expressive, racing-inspired appearance.

Blue

Blue tint for a cooler and more individual design language.

Devil Red

Red tint for a bold and sportier appearance.

WIDE MODEL COVERAGE

Pre-cut light film for a wide range of vehicles

We produce pre-cut headlight film for a very wide range of vehicle makes and model years. Enter the vehicle model or registration number using the options on the product page so that the correct cutting template can be used.

Aixam, Alfa Romeo, Aston Martin, Audi, Bentley, BMW, Cadillac, Chevrolet, Chrysler, Citroën, Cupra, Dacia, Daewoo, Dodge, Ferrari, Fiat, Ford, Genesis, GMC, Honda, Hummer, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, Kia, Lamborghini, Lancia, Land Rover, Trucks, Lexus, Lincoln, Maserati, Mazda, Mercedes-Benz, MINI, Mitsubishi, Nissan, Opel, Peugeot, Polestar, Pontiac, Porsche, Range Rover, Renault, Rover, Saab, SEAT, Skoda, Smart, SsangYong, Subaru, Suzuki, Tesla, Toyota, Vauxhall, Volkswagen and Volvo.

Availability may vary by model, model year and light design. Contact customer service if you are unsure which version to select.

PROTECTION & FINISH

Developed for exposed vehicle lights

Impact-absorbing 0.2 mm film
Helps protect the light surface against minor stone chips and the stresses of normal road use.

99% UV protection
The UV protection helps preserve the surface of the light lens and the appearance of the film during normal use.

Conformable adhesive system
The adhesive can help visually smooth out minor imperfections and light road abrasion on worn light surfaces.

Removable
When removed correctly, the film can be taken off without leaving adhesive residue or damaging a suitable, intact light surface.

PEACE OF MIND AFTER PURCHASE

3-year product warranty

ProShield® headlight film is covered by a 3-year product warranty against fading, incorrect colour reproduction and cracking, in accordance with the applicable warranty terms.

The warranty requires the film to be installed and used as intended. Normal wear, installation damage and damage caused by external influences are not covered unless otherwise stated in the terms.

Read about the product warranty

Important information about coloured and tinted films

Coloured or tinted film may affect the light pattern and light transmission. You are responsible for ensuring that the selected film and its installation comply with the regulations applicable where the vehicle is used. Do not cover sensors, reflectors or other functions that must remain unobstructed.

PREPARE FOR INSTALLATION

The right knowledge and the right tools produce a better result

Read the installation guide before you begin, learn more about ProShield® and, if required, add a knife, squeegee, application fluid and other accessories.

View installation guide Learn about ProShield® View tools & accessories

Omdöme

(4.3/5) Based on 219 unique ratings.

Rating (0)

Välj språk Vælg sprog Velg språk Choose language Sprache wählen Valitse kieli Choisir la langue Elegir idioma