CLEARSHIELD® WPF CLEAR · TRANSPARENT PROTECTIVE FILM · 8 X 1.22 M

Clearshield® WPF Clear - transparent windscreen protection on a roll

Protect windscreens, glass roofs and other vehicle glass against stone chips, road debris, scratches and everyday wear with a flexible, optically clear TPU film from Solar Gard®. The roll measures 8 metres x 1.22 metres and normally covers approximately 4-6 windscreens or glass roofs, depending on the size and shape of the glass and material usage.

Quick facts

Material:
Flexible TPU with a protective topcoat

Installation:
On the exterior of the glass

Roll size:
8 metres x 1.22 metres

Thickness:
Approximately 8 mil / 200 micrometres

UV protection:
Blocks more than 99 %

Finish:
Clear - transparent and uncoloured

Warranty:
Up to 5 years depending on glass location

Takes the first impact

The durable film absorbs and distributes force from smaller stone chips and road debris before the impact reaches the glass.

Optically clear

The TPU layer is designed for very low distortion and a smooth, clear view through the vehicle glass.

More than 99 % UV protection

The transparent Clear film blocks more than 99 % of UV radiation and helps protect passengers and the interior.

Conforms to curved glass

The flexible and slightly stretchable material adapts smoothly to curved and more complex glass surfaces.

ADVANCED CONSTRUCTION

Flexible TPU with a protective topcoat

Clearshield® WPF is designed for exterior use and combines several functional layers:

•  Topcoat with self-healing properties against minor surface marks

•  Optically clear TPU with very low distortion

•  Transparent and uncoloured Clear construction that preserves the appearance of the glass

•  Specially developed transparent adhesive for stable adhesion

PROTECT THE ORIGINAL GLASS

Especially valuable on expensive and difficult-to-replace windows

Windscreen replacement on modern passenger cars may require calibration of cameras and advanced driver assistance systems, known as ADAS. On trucks, buses and work vehicles, large or specially shaped windows can also be very expensive, difficult to source and time-consuming to replace. By helping protect the original glass against smaller stone chips and wear, WPF can help reduce the need for repairs and replacements over time.

PROFESSIONAL INSTALLATION RECOMMENDED

Read the installation instructions before starting

Clearshield® WPF Clear is supplied as roll material and cut to the shape of the glass. The film is wet-installed on the exterior of the glass. The glass must be cleaned thoroughly, and the film must be positioned and squeegeed using the correct technique for an even, optically clear and durable result.

A small amount of moisture may remain beneath the film immediately after installation. Temporary milkiness or haze is normal and usually disappears within a few days, depending on the weather and drying conditions.

WARRANTY

Warranty by application area

Roof glass and side windows: up to a 5-year limited product warranty.

Windscreen and rear window: 1 year or a maximum of 12,000 km, whichever occurs first.

The warranty applies in accordance with Solar Gard's complete terms, limitations and requirements for correct installation and care.

IMPORTANT BEFORE ORDERING AND INSTALLATION

Check regulations and glass suitability

The product is transparent and uncoloured, but always check applicable local regulations before applying film to a windscreen or other vehicle glass. Also confirm that the film is suitable for the intended glass location and follow the complete installation instructions. WPF is not recommended for rear windows fitted with a rear wiper.